Send Email
Send SMS
Search
Accumax India


Clean Air Equipments

Leading Manufacturer of laminar air flow horizontal wooden laminated, air shower, biohazard safety cabinet, garments storage cabinet, pass box and fume hood from New Delhi.

Laminar Air Flow Horizontal Wooden Laminated

REQUEST CALLBACK

Laminar Air Flow Horizontal Wooden Laminated
Approx. Rs 40,000 / Piece
Get Best Quote

The Cabinets Are Fabricated Out Of Thick Board Duly Sunmica Clad / Mild Steel Powder Coated / Stainless Steel. Side Panels Are Made Out Of Thick Transparent Plexi Glass Duly Framed. The Unit Is Fitted With Pre- Filter & HEPA Filter, UV Germicidal Tube, Fluorescent Light, Manometer, Gas Cock. Air Is Drawn Through Pre- Filter And Is Made To Pass Through Highly Effective HEPA Filters Having Efficiency Rating As High As 99.99% Thus Retaining All Air-Home Borne Particles Of Size 0.3 Micron And Larger. Using A Dynamic Machine, The Blower And The Motor Assembly Is Statically And Dynamically Balanced Motor Of 1/4 H.P. Capacity Operates With Minimum Noise Level. The Working Table Provides Comfortable Sitdown Working Position For The Operator. To Work On 220/230 V AC Supply.


Specifications :

MOC CabinetWooden Laminated / Mild Steel Powder Coated / Stainless Steel
Main FilterHEPA Filter (99.97% Efficient At 0.3 Micron Particles)
PrefilterWashable Synthetic Pre-Filter
SterilizationU V Germicidal Tube
IlluminationFluorescent Tube
Front DoorSliding Door Plexiglass
ManometerAnalogue Type
Size Working Bench600mm x 600mm x 600mm
900mm x 600mm x 600mm
1200mm x 600mm x 600mm
1800mm x 600mm x 600mm
No. Of HEPA Filter1, 2
Electric SupplyAC 230V, 50/60Hz

 

Yes! I am Interested

Air Shower

REQUEST CALLBACK

Air Shower
Approx. Rs 1.5 Lakh / Piece
Get Best Quote

Construction is of Mild Steel Powder coated / Stainless Steel 304 grade A self contained well built factory assembled modular system designed to deliver a spray of moving air from nozzles transported and virtually can be installed at any site. Absolute filter-fan module provide positive pressurization and filtration down to 99.97% efficiency on 0.3 micron. The clean air inside the shower will support a very high degree of sterility and clean air condition. The system is supplied with optionally aluminium grated floor located approximately 6 inches above datum level. Duct air chassis are installed within the walls of the units. While the system is in operation, both doors will be automatically locked. In the event of power failure or an emergency, the doors get unlocked. Provided with two aluminium framed acrylic / glass door with automatic locking device. Statically/dynamically balanced, blower draws the air through pre-filters and throws it through HEPA filter into the chamber. Electrical Supply 220/230V AC, 50/60Hz.

Size Inside : 3’ x 3’ x 7’

 

Yes! I am Interested

Biohazard Safety Cabinet

REQUEST CALLBACK

Biohazard Safety Cabinet
Approx. Rs 1 Lakh / Piece
Get Best Quote

Biosafety Cabinet Class II

Bio Safety Cabinet Class II Also Have An Open Front Design Provided With Negative Pressure Generation Module. This Equipment Provides Recirculation Of Mass Flow Of HEPA Filtered Air. This Type Of Bio Safety Cabinets Provides Excellent Protection To Users, Products And The Environment.

Bio Safety Cabinet Class III


Bio Safety Cabinet Class III Is A Totally Closed Compact And Purely Ventilated Enclosure Having An Air Tight Construction. All The Experiments/Procedures Are Performed Through Rubber Gloves, Which Are Provided At The Front Of The Unit.
The Primary Feature Of Class III Bio Safety Cabinets Is That They Maintain Negative Pressure Of 0.5” Or More While In Operation. The Supplies Of Fresh Air Are Taken Inside The Enclosure Through Specially Designed High Efficiency Perfect Air Filters. The Exhausted Air Of The Unit Is Passed Through Two Modules Of HEPA Filters, Which Are Strategically Placed In Series. The Air Passes Through The Two Filters Before Being Discharged In The Environment. These Type Of Bio Safety Cabinet Have Complete Self Sustained Exhaust System.

Our Units Are Made of Wooden Laminated / Mild Steel Powder Coated / Stainless Steel The Side Panels Made Out Of Heavy Plexi Glass Sheets Are Mounted On Anodized Aluminum Frames. The Whole Unit Is Supplied With Manometer To Gauge The Pressure Drop In The Unit While Operation, Beside The Gas Cock / Vacuum Cock, Power Socket, Fitted With Fully Washable Synthetic Pre-Filter Units And Secondary High Efficiency Perfect Air Filters Made Of Mini Pleated Non Woven Fabric. The Efficiency Of Our Filters Have A Rating Better Than 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Our Units Have The Capacity To Hold All Suspended Particles Of Size > 0.3 Micron. All Our Bio Safety Cabinets Are Provided With Perfectly Balanced (Static As Well As Dynamic) Motor And Blower. All The Units Are Provided With Adequate Illumination At The Work Table By Means Of Fluorescent Lights Panel Concealed At The Upper Portion Of The Unit. Ultra Violet Light Optimal Wattage Ultra Violet Light Is Incorporated In The Illumination Panel Of Our Bio Safety Cabinets To Take Care Of The Sterilization Of The Existing Air Present In The Enclosure, Thus Ensuring The High Standard Of Cleanliness In Our Equipment Before The Commencement Of Actual Working.


Specifications :

MOC CabinetWooden Laminated /Mild Steel Powder Coated / Stainless Steel
Main FilterHEPA Filter (99.97% Efficient At 0.3 Micron Particles)
Pre-filterWashable Synthetic Pre-Filter
SterilizationUV Germicidal Tube
IlluminationFluorescent Tube
Front DoorSliding Door Plexiglass
ManometerAnalogue Type
Size Working Bench600mm x 600mm x 600mm
900mm x 600mm x 600mm
1200mm x 600mm x 600mm
1800mm x 600mm x 600mm
No. Of HEPA Filter1, 2
Electric SupplyAC 230V, 50/60Hz
Yes! I am Interested

Garments Storage Cabinet

REQUEST CALLBACK

Garments Storage Cabinet
Approx. Rs 70,000 / Piece
Get Best Quote

Sterile Garment Cabinet Is Widely Used For Storage Of Clean Garments For Clean Rooms. These Are Equipped With HEPA Filters And Ultraviolet Germicidal Tubes. These Are Safe And Ensures That The Garments Are Free From Bacterial Contamination. Made Of All Stainless Steel 304 Grade Fitted With Perforated Storage Shelves Of Wire Mesh, Equipped With UV Germicidal Tubes, Fluorescent Tube, Hepa Filter, Prefilter, Motor Assembly, Manometer, Door With Glass View. Electrical Supply 220/230V AC, 50/60Hz.


Specifications :

WORKING AREAWxDxH
600mm x 450mm x 900mm 900mm x 450mm x 1350mm 1200mm x 450mm x 1350mm 600mm x 600mm x 900mm 900mm x 600mm x 1350mm 1200mm x 600mm x 1350mm
Yes! I am Interested

Pass Box

REQUEST CALLBACK

Pass Box
Approx. Rs 40,000 / Piece
Get Best Quote

Controlling The Ingress Of Particulate Contamination Into Clean Rooms And Other Controlled Environments Is Paramount In Order To Maintain The Integrity Of Products And Processes. Personal Traffic Is The Most Important Factor Which Must Be Controlled. Pass Boxes And Transfer Hatches Are A Cost Effective Solution As They Allow Materials To Be Transferred Into The Controlled Environment Without Actual Personnel Movement. They May Also Be Used To Protect The External Environment From Egress Of Contamination, For Example, In Biological Safety Laboratory Applications.

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION

Electromechanical Interlock Is Reliable, Maintenance Free And Maintains Clean Room Integrity By Preventing Both Doors From Being Opened At The Same Time. The Main Body Of Pass Box Is Constructed Of Stainless Steel 304 Grade. The Pass Box Internally Is Constructed Of Stainless Steel, Making The Work Zone Easy To Clean. Transparent Doors Provide A Clear View Of The Internal Chamber. Fitted With UV Lamp For Germicidal Activity. Door Opening And Closing Indication Is Provided. Pass Box Is Constructed of Wooden Laminated / Mild Steel Powder Coated / Stainless Steel. Available Static Model & Dynamic Model. Dynamic Model is having Hepa Filters. Electrical Supply 220/230V AC, 50/60Hz.

PASS BOX : STATIC MODEL / DYNAMIC MODEL

Size Inner : 450mmx450mmx450mm 600mmx600mmx600mm 600mmx600mmx900mm

Yes! I am Interested

Fume Hood

REQUEST CALLBACK

Fume Hood
Approx. Rs 90,000 / Piece
Get Best Quote

Fume Hood Is Developed To Be Used As Semi Closed Ventilated Enclosures So As To Protect The User From Harmful And Toxic Fumes And Vapors And To Eliminate The Possibility Of Accidental Fire, Which May Be Resulted Due To The Emission Of Inflammable Gases During The Course Of A Given Experiment. Hence The Material Of Construction Of All Our Fume Hoods Are Carefully Chosen Between Industrial Grade Commercial Wooden Board Covered With Laminated Sheets / Mild Steel Powder Coated / Stainless Steel. (Option)Lined Completely With FRP Lining. The Work Table Is Made Of Granite. The Work Bench Is Provided With A Small Sink Made Of Stainless Steel. Chemical Storage Rack Is Provided. Fume Hood Is Provided With Sliding Sash Made Out Of Glass Duly Framed With Sliding Motion And Counter Weight Balanced Mechanism. Our Units Ensure Minimum Illumination Level Of Approx 800 Lux On The Work Table. The Unit Is Equipped Very Diligent Heavy Duty Exhaust System, Comprising Of Dynamically Balanced Centrifugal Impeller With High Speed Motor Of Approx 1440 RPM. Electrical Supply 220/230V AC, 50/60Hz

 

Specifications:
Dimension Working (Length x Depth x Height) 1200mm x 600mm x 1350mm

 

Yes! I am Interested

Laminar Air Flow Cabinet Vertical

REQUEST CALLBACK

Laminar Air Flow Cabinet  Vertical
Approx. Rs 50,000 / Piece
Get Best Quote

he Cabinets Are Fabricated Out Of Thick Board Duly Sunmica Clad / Mild Steel Powder Coated / Stainless Steel. Side Panels Are Made Out Of Thick Transparent Plexi Glass Duly Framed. The Unit Is Fitted With Pre- Filter & HEPA Filter, UV Germicidal Tube, Fluorescent Light, Manometer, Gas Cock. Air Is Drawn Through Pre- Filter And Is Made To Pass Through Highly Effective HEPA Filters Having Efficiency Rating As High As 99.99% Thus Retaining All Air Borne Particles Of Size 0.3 Micron And Larger. Using A Dynamic Machine, The Blower And The Motor Assembly Is Statically And Dynamically Balanced Motor Of 1/4 H.P. Capacity Operates With Minimum Noise Level. The Working Table Provides Comfortable Sitdown Working Position For The Operator. To Work On 220/230 V AC Supply.


Specifications :

MOC CabinetWooden Laminated /Mild Steel Powder Coated / Stainless Steel
Main FilterHEPA Filter (99.97% Efficient At 0.3 Micron Particles)
PrefilterWashable Synthetic Pre-Filter
SterilizationUV Germicidal Tube
IlluminationFluorescent Tube
Front DoorSliding Door Plexiglass
ManometerAnalogue Type
Size Working Bench600mm x 600mm x 600mm
900mm x 600mm x 600mm
1200mm x 600mm x 600mm
1800mm x 600mm x 600mm
No. Of HEPA Filter1, 2
Electric SupplyAC 230V, 50/60Hz

 

Yes! I am Interested

 
X


Call Us: +91-8079447279
Accumax India
Rupali Sharma (Director)
105, First Floor, Vishal Tower, District Center, Janakpuri ,
New Delhi - 110058, Delhi, India
Contact via E-mail
Contact via SMS



Home  |   About Us   |  Products We Offer  |  Site Map  |   Contact Us   |   Mobile Site

© Accumax India. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Accumax India